| Description: |
- Ready to fly in minutes - All you need is a 4-channel full range or parkflyer transmitter, receiver, battery and charger (sold separately)
- Powerful 15-size brushless outrunner motor installed
- E-flite® Pro 30A Switch-Mode BEC ESC installed
- Full 4-channel control – throttle, aileron, elevator and rudder
- Dual aileron servos for precise control
- Steerable tail wheel installed
- Durable and lightweight Z-Foam™ construction
- Two-piece plug-in wing
Designed by Mike McConville, the ParkZone® Extra 300 PNP comes out of the box equipped with a powerful brushless motor that provides more than enough power for precision aerobatics. Positive and negative G maneuvers, snap rolls and more are all within the Extra's capabilities. And it lets you do it all with virtually no roll or pitch coupling. Best of all, you can have this Plug-N-Play® version airborne in just a few minutes. All you need is a 4-channel full range or parkflyer transmitter and receiver, a 3S 11.1V 2200mAh Li-Po battery, and a 3S Li-Po charger.
Charge-and-Fly™ convenience, outstanding flight performance and beautiful scale detail—with the ParkZone Extra 300 PNP, you get it all.
Loose Wheel Pants; See Addendum under the Support Tab.
You will need...
Transmitter
Receiver
Battery
Charger
Wingspan: 40.6 in (1030mm)
Overall Length: 36.8 in (935mm)
Flying Weight: 34.5 oz (980 g)
Motor Size: 15-size 950Kv brushless outrunner
Servos: 4 installed
Trim Scheme Colors: White with orange and purple
CG (center of gravity): Approximately 3 in (76mm) from leading edge of wing at wing root
Prop Size: 10.5 x 9
Speed Control : 30A Pro SB Brushless ESC
Recommended Battery: 11.1V 2200mAh 25C (recommended)
Landing Gear: Fixed main with steerable tail wheel
|