The Carbon-Z™ Yak 54 is a quantum leap in unlimited aircraft design that uses patent pending Carbon-Z construction. The brainchild of world aerobatic champion, Quique Somenzini, it comes out of the box equipped with the phenomenal brushless Q-Power system and digital high-speed servos. The combination of these high-performance components with the light weight and superb rigidity of the Carbon-Z airframe result in a 3D airplane with a 2:1 thrust-to-weight ratio that knows no limits.
Best of all, you can have this Plug-N-Play® version airborne in just a few minutes. All you need is a full range aircraft transmitter and receiver, a 4S 14.8V 2800mAh Li-Po battery, and a 4S Li-Po charger. To get the most from the Carbon-Z Yak 54, a programmable aircraft transmitter with dual rates and exponential function is recommended.
You will need...
- A full range aircraft transmitter (with programming capabilities highly recommended)
- Compatible full range receiver
- 4S 14.8V LiPo Battery (2800mAh+) and compatible charger
Wingspan: 48.0 in (1220mm)
Overall Length: 48.5 in (1230mm)
Wing Area: 525 sq in (34.0 sq dm)
Flying Weight: 3.75-3.80 lbs (1.70-1.73kg)
Motor Size: 25-size 1,000Kv Brushless Outrunner (included)
Radio: 6+ Channel Transmitter and Receiver
Trim Scheme Colors: Red Pantone 185C, Blue Pantone 286C
CG (center of gravity): At wing tip, 6 inches (153mm) forward from the aileron trailing edge
Wing Loading: 16.2 oz/sq foot (50.14 grams/sq dm)
Prop Size: 12 x 5.25 (305 x 133mm) (included)
Spinner Size: 1.57 in (40mm)
Speed Control : 60-Amp Pro Switch-Mode BEC Brushless (included)
Recommended Battery: 2,800mAh 4S 14.8V LiPo
Flaps: No
Retracts: No
Control Throw (Ailerons): Low: 30mm, High: 65-70mm up/down at aileron root
Control Throw (Elevator): Low: 15mm, High: 48-50mm up/down at counter balance leading edge
Control Throw (Rudder): Low: 45mm, High: 65mm right/left at counter balance leading edge
Approx. Flying Duration: 5 minutes
Minimum Age Recommendation: 14 years
Experience Level: Intermediate
Recommended Environment: Outdoor
Assembly Time: Less than 1 Hour
Is Assembly Required: Yes